Half-watched films and forgotten titles are the small frustrations that add up. A watchlist fixes the second one, and continue watching fixes the first, but only if you understand how they work in an app with no account. In NetMirror, both features are local to the device you are using. They remember what you saved and where you stopped, on that phone, that television, or that emulator, and they do not follow you to another device. This guide explains how to build a watchlist that actually gets used, how continue watching behaves, and what to do when a saved title or a resume point disappears.
If the app is not installed yet, start from the download page. The steps here assume the Android phone guide has been followed, or the equivalent for a television through the NetMirror TV page.
How the Watchlist and Continue Watching Work
Because NetMirror has no account, there is no server holding your list. When you save a title, the app stores a marker on the device: the title, and, for continue watching, the time you stopped. That marker stays on the device until the app data is cleared, the app is reinstalled, or an update clears stored data. It does not appear on your television because you saved it on your phone, and it does not survive a reinstall. Every habit in this guide is built around that one fact.
1. The watchlist
The watchlist is a list of titles you have marked to watch later. It is a shortcut, not a download and not a reservation: saving a title does not keep it available, and a title can leave the catalogue or change source while it sits on your list. The list itself is a set of links to titles, in the order you saved them or in the order the app displays them, and opening a saved title takes you to its details page, where you choose a source and start playback.
2. Continue watching
Continue watching is the row or section that shows titles you started and did not finish, with a progress marker showing how far through each one you reached. Tapping a title resumes playback from near where you stopped, rather than from the beginning. The resume point is approximate, because the app records the position when playback stops or pauses, and a crash or a forced close can lose the last few minutes. The crashing guide covers the case where the app closes and the resume point is lost.
3. What is not saved
The app does not save a viewing history beyond the continue-watching row, it does not save your subtitle or audio choices per title in a way that follows you, and it does not save a rating or a note about a title. Subtitle and audio choices are made in the player each time, as the subtitles and audio guide explains. If you want to remember why you saved a title, or which version to choose, that note has to live outside the app.
Creating a Watchlist, Step by Step
Step 1: Open the title you want to save
Find the title by browsing or searching, and open its details page. Do not save from a poster alone where the app offers a details page, because the poster can belong to a different cut or a similarly named title. Check the description, the year, and the genre on the details page, and confirm it is the title you meant.
Step 2: Save it to the watchlist
On the details page, look for a watchlist, bookmark, or plus icon, usually near the play button. Tap or select it once. The icon should change state, filling in or showing a tick, to confirm the title is saved. If nothing changes, tap again once and check the watchlist itself, rather than tapping repeatedly, which can add and then remove the title.
Step 3: Check the watchlist
Open the watchlist from the home screen or the menu, where the app places it. The title you just saved should appear there. If it does not, return to the details page and save it again, and check once more. A title that will not stay saved usually means the app data is restricted on the device, or the app was closed before the save was written, and the fixes in the crashing guide and the not-opening-after-update guide apply.
Step 4: Build the list in viewing order
Save titles in the order you intend to watch them, or save a small number at a time. A watchlist with forty titles is a catalogue of its own, and it stops being useful. Keep the list short: five to ten titles at a time is enough for a week of viewing, and it keeps the choice at the start of an evening to a minute rather than a browse through the whole catalogue.
Using Continue Watching Well
Resume from the row, not from search
When you return to a half-watched title, open it from the continue-watching row. Searching for the title again and starting it fresh will usually start from the beginning, and it can create a second entry in the row. The row is the resume path, and search is the discovery path. Keeping them apart avoids the common frustration of losing twenty minutes of a film.
Pause cleanly when you stop
Pause playback before leaving the app, and give the app a second to record the position before switching away. Closing the app mid-stream, or letting the device run out of battery, is the usual cause of a resume point that is minutes behind where you actually stopped. On a television, use the remote to pause, then back out to the home screen, rather than switching the television off while the title is playing.
Check the resume point before settling in
When a title resumes, watch the first thirty seconds to confirm it picked up where you left off. If it resumed too early, skip forward to where you remember stopping. If it resumed too late, rewind. The player controls for skipping are the same on every device, and a quick check at the start saves a spoiler or a repeated scene later.
Managing the Watchlist
Removing a finished title
When you finish a title, remove it from the watchlist from its details page, using the same icon you used to save it. The icon should return to its unsaved state. A finished title left on the list clutters the choice at the start of the next evening, and a list that is never pruned grows until it is ignored. Make removing a finished title part of finishing it, the way you would put a book back on the shelf.
Removing a title you no longer want
Remove a title the same way, from its details page or from the watchlist itself where the app offers a remove option. If a title keeps reappearing after removal, it is usually because the removal was made while the app was offline or before the change was written, and removing it again after a restart clears it. A title that cannot be removed at all points to the same app-data problem as a title that cannot be saved, and the crashing guide covers the restart and data steps.
Reordering the list
The app does not offer a manual reorder for the watchlist on most builds. The practical workaround is to remove and re-save titles in the order you want, with the title you want to watch next saved last, or first, depending on how the app sorts the list. Check the order after re-saving, because the sort differs between builds. Do not spend long on ordering: a short list in any order is more useful than a long list in perfect order.
Sharing a list with the household
Because the list is local to one device, there is no share button and no household list. If the family watches on the television, build the list on the television itself, so everyone sees the same list when the television is on. If one person builds a list on a phone, the titles have to be searched for again on the television. The casting guide covers the phone-to-television route, but casting does not carry the watchlist with it: the list stays on the phone, and the television shows only what is cast.
Quick Reference: Watchlist and Resume Behaviour
| Feature | Remembered | Survives |
|---|---|---|
| Watchlist | Saved titles on this device | Until data cleared or reinstall |
| Continue watching | Resume point on this device | Until finished, cleared, or reinstall |
| Subtitle and audio choice | Chosen per playback | Not carried to the next title |
| Across devices | Nothing | No sync without an account |
| After an update | Usually kept | Sometimes cleared |
When the Watchlist or Resume Point Disappears
After an update
An update sometimes clears stored data, including the watchlist and resume points. This is expected behaviour after a reinstall, and the fix is to rebuild the list. Keep a short note of the titles on the list, outside the app, so rebuilding takes a minute. The update guide explains how to update safely and what to check afterwards, and the not-opening-after-update guide covers the case where the app itself will not open after an update.
After clearing data or reinstalling
Clearing the app data or reinstalling the app removes the watchlist and the resume points, because they were stored only on the device. There is no way to recover them from the app, and no account to sign back into. Reinstall only from the download page, and rebuild the list from your note. Do not install a copy that promises to restore a list: it cannot, and the file is not to be trusted.
On a different device
A watchlist built on a phone does not appear on the television, and a resume point on the television does not appear on a phone. This is not a fault, and no setting changes it. If you move between devices, note the title and the time you stopped, and resume manually on the other device. The offline guide covers the related case of downloads, which are also tied to the device that downloaded them.
A title on the list will not play
A saved title can become unplayable if its source changes or the title leaves the catalogue. The watchlist entry remains, but playback fails or shows no streams. Search for the title again: a fresh search often finds a working source where the saved entry does not, because the saved entry points to the older source. The server and streams guide explains source choice and what to do when no stream is available, and the buffering guide covers playback that starts and then stops.
Watchlist and Continue Watching on Each Device
The features behave the same everywhere, but the way you reach them differs. On a phone or tablet, the watchlist and the continue-watching row are on the home screen, and saving is a single tap. On Android TV and Fire TV Stick, use the remote to move to the save icon and to the row, and expect the row to sit near the top of the home screen. The Android TV guide and the Fire TV Stick guide cover remote navigation. On a PC through an emulator, the mouse makes saving and resuming quicker, and the PC page and the PC emulator guide cover the setup. When casting with Chromecast, the resume point lives on the phone, and the cast screen shows what the phone plays: pause on the phone to record the position, and resume from the phone row the next time. For iPhone and iPad, where there is no official app, the iOS page and the iPhone and iPad guide explain the honest routes, and the watchlist follows whichever device is actually running the app.
For families, the television is the right place to build the shared list, because everyone watches the same screen. The parental controls guide explains how to use the watchlist as a pre-approved list for younger viewers, with the honest limit that it is not a lock. For a household where each person watches on their own phone, each phone has its own list, and there is no way to merge them.
Download NetMirror: Latest Version
Where to Go Next
For the wider setup, the Android phone guide covers installation, the NetMirror TV page gathers the television guidance, the PC page covers computers through an emulator, and the iOS page states the position for iPhone and iPad. For the features around the watchlist, the subtitles and audio guide covers language choice per title, the offline guide covers downloads where they are offered, the update guide covers keeping the genuine app current, and the buffering guide covers playback that stops. Start again from the download page whenever the app itself needs reinstalling.
Conclusion
A watchlist and continue watching in NetMirror are simple, local tools: save a title on the device you are using, resume from the row on that same device, pause cleanly so the position is recorded, and keep a short note of the list outside the app for the day an update or a reinstall clears it. They will not follow you to another device, and they will not remember a title after the app data is gone, and knowing that in advance is what keeps them useful rather than frustrating. Keep the list short, prune it when a title is finished, and let the row do the remembering, so the start of each evening is a choice, not a search.
Open the title details page and tap the watchlist, bookmark, or plus icon near the play button. Check the watchlist itself to confirm the title was saved, and tap only once, because tapping again can remove it.
Open it from the continue-watching row on the home screen, which resumes near where you stopped. Searching for the title again usually starts it from the beginning.
The watchlist is stored only on the device. An update, clearing the app data, or a reinstall can clear it. Rebuild it from a short note kept outside the app.
No. There is no account, so nothing syncs. A list built on a phone stays on that phone, and a list built on the television stays on the television.
Open the title details page and tap the watchlist icon again so it returns to its unsaved state, or use the remove option in the watchlist where the app offers one.
8 thoughts on “How to Create a NetMirror Watchlist and Continue Watching”